1
2
3
4
5
6
Plasma snijmachine TI-3015
1
Torch Hoogte Controller

Automatic height control (THC)

2
hypertherm-powermax-45

Standard delivered with Hypertherm Powermax 45A

3
Automatisch smeersysteem

Automatic lubrication system for all guidings and rack and pinion

4
Hiwin-tandheugel

Hiwin linear guiding and rack and pinion

5
Snijtafel

Cutting table with optional water container

6
Buizen snijden

Cutting of round tubes with the optional rotary module

PRICE FROM € 18.000,- EXCL. VAT

Or € 382,- excl. VAT per month (60 months duration)

1. HEIGHT CONTROLLER

Hypertherm-Machine-Torch– THC – height adjustment for the torch in relation to the material
– Hole detection – prevents torch from going all the way down
– Edge detection – outside the edge the torch does not drop completely

2. HYPERTHERM

Hypertherm-powermax-65– POWERMAX 45 – plasma source
– Start/stop – signal controlled, fully automatic
– Torch – supplied with machine torch

3. LUBRICATION SYSTEM

Smeersysteem– Lubrication – automated lubrication system
– Guides – automatically lubricated
– Gear racks – automatically lubricated

4. GUIDINGS

Geleidingen– HIWIN – backlash-free and stable Hiwin guides
– Gear rack – gear rack for moving axles
– Gearing – helical gearing for smooth movement

5. CUTTING TABLE

Snijtafel– Stripping – easy replaceable
– Extraction – air extraction under the cutting strips
– Water container – optional bottom strip water container (no extraction)

5. OPTIONS

Buizen– Rotation module – cutting pipes with rotation module
– Suction – suitable extraction from Donaldson Torit
– Water trough – optional bottom water trough strip

PLASMA CUTTING MACHINE TI-3015P

The plasma cutting machine TI-3015P with an effective range of 3000×1500 mm, is a plasma cutting machine for cutting metal. Plasma cutting machines have a lot of capacity (with a 45 Ampere Hypertherm Powermax you can already cut up to 15 mm steel), are accurate and are relatively cheap. This makes the machine particularly suitable for small companies, prototyping companies, engineering offices and metal production companies. With the special magnetic attachment of the head there is an extra protection against a collision and you can also set the torch in 45 degrees for cutting a bevel (only in the longitudinal directions).

VERY DEPENDENT MACHINE

The plasma cutting machine TI-3015P is a very solid (in the Netherlands) built machine! A robust steel frame can withstand the torsional forces and heavy metal plates effortlessly. The strong hiwin linear guide and gear rack (with helical teeth) ensures accuracy and smooth movements made for durability. The machine has been developed with quality in mind and attention to technical details. As a result, we guarantee a very long service life and ease of operation. Daily use of the machine is no problem at all.

HOUSING

We deliver the plasma cutting machine TI-3015P in a enclosure as standard. This is to ensure a cleaner working environment, higher safety and better control over the extraction of smoke, gases and particles. The picture shows the machine as normally delivered excluding the housing.

STANDARD DELIVERY

Hyperthem Powermax 45 Dutch or English user manual
Plasma source power 45 Ampere (good for cutting up to 15 mm steel) Plasma head attachment with magnets for extra safety
Aligned cutting bed with cutting strips (removable) Complete with software for the operation, console and computer
Connection for cutting gas such as oxygen Automatic lubrication system for all guides
Steel frame and cutting strips (cutting strips are removable) NEMA 34 stepper motors
Full housing! LED lighting inside housing
Contact us